While USB drives help us manage and transfer our data, they often suffer from unwanted connectivity and data loss issues. A while back, I faced a similar situation using my pen drive. Even after numerous attempts, my USB drive was not getting detected by the system. Thankfully, I was able to resolve the USB drive not showing up issue by formatting it. After that, I used a data recovery tool to get the lost content from my pen drive. In this guide, I will teach you how to resolve these USB drive connectivity issues and perform USB data recovery as well.
How to Resolve USB connectivity issues?
If your USB drive is not getting detected by your system, then consider following these quick fixes to resolve this.
- Firstly, check if your USB drive has been damaged or not. Connect it with some other computer to check it.
- Also, examine the USB port of your computer and make sure it doesn’t have accumulated dirt or debris.
- Go to the Device Manager settings on your computer and consider upgrading the USB drivers.
- Check the firewall or anti-virus tool that you are using and turn it off. It could be blocking the USB connection.
- You can also consider updating your Windows firewall to the latest version
- If nothing else would seem to work, then format your USB drive and try connecting it again.
Recoverit Data Recovery: The Best USB Data Recovery Tool
While resolving the USB drive not showing up issue, you might end up formatting your pen drive. If you don’t want to suffer from the permanent loss of your data, then use Recoverit Data Recovery tool. It is available for both Window and Mac versions with a user-friendly interface. The tool can help you get back all kinds of data from a USB drive like your photos, videos, documents, compressed files, and more.
The application is known to produce exceptional results in all scenarios like corrupt USB drive, formatted USB drive, accidental deletion of data, and so on. The best thing about Recoverit is that it allows us to first preview our data and later restore it to a secure location. In this way, we can perform a selective recovery of the extracted content. Here’s how you can perform USB data recovery using Recoverit.
Step 1: Select a recovery mode
Launch the Recoverit Data Recovery desktop application and choose the “External Device Recovery” option from the list. You can recover data from any external source like hard disk, MP3 player, pen drive, SD card, etc.
Step 2: Choose a location to scan
Carefully, connect your USB drive to your system to proceed. The application would detect it and provide a list of locations you can scan on the next window. From here, you can just select the icon of your USB drive to start the process.
Step 3: Let the application scan your USB drive
As the data scanning would proceed, you can just sit back and wait for a while for the process to be completed. Since it might take a while, it is recommended not to disconnect the USB drive in between.
Step 4: Restore your data
In the end, the application would display the retrieved content for you to preview and select the desired files. Click on the “Recover” button to save it to a trusted location.
Following the same drill, you can also perform data recovery on other external sources as well. Not just that, Recoverit Data Recovery can also help you extract data from a system’s internal partition too. It is known for its high success rate and will keep all your data 100% secure. All of this makes it a must-have data recovery software that you should consider using as well
